Support

I'm starting out with using Reuse and was after best practices.  Search doesn't turn anything obvious up (the link to the 2015 webinar doesn't work for me).  Please can you point to any material on best practices?

I have a specific question associated with this as well.  I've reused a set and have sync'd it to my satisfaction, leaving a couple of accepted delta.  How do I mark/deal with the deltas I'm happy to leave, so that I don't have to review them every time I do a sync?  I tried breaking the sync links but this doesn't seem to work.

Thank you for any help.

------------------------------
Scott Rocca
UTAS
Malvern
------------------------------

Hi Scott,

There are a series of videos located here in the Reuse and Sync section that are very helpful.  Can you give me the 2015 webinar link you are having trouble with and I will investigate why it is not working?

Regarding your specific question, what do you mean by "accepted delta"?  Are these the reused items you do not want synced?

------------------------------
Rosemary Joe
Jama Software
------------------------------

Original Message:
Sent: 01-05-2018 04:59
From: Scott Rocca
Subject: Best practices for Reuse

I'm starting out with using Reuse and was after best practices.  Search doesn't turn anything obvious up (the link to the 2015 webinar doesn't work for me).  Please can you point to any material on best practices?

I have a specific question associated with this as well.  I've reused a set and have sync'd it to my satisfaction, leaving a couple of accepted delta.  How do I mark/deal with the deltas I'm happy to leave, so that I don't have to review them every time I do a sync?  I tried breaking the sync links but this doesn't seem to work.

Thank you for any help.

------------------------------
Scott Rocca
UTAS
Malvern
------------------------------

​Rosemary

Thank you for the pointer.  Next time I'll look there first!

The link was in this discussion : Where is the "Ask Jama About Reuse" webinar?

Kind regards

Scott


------------------------------
Scott Rocca
UTAS
Malvern
------------------------------

Original Message:
Sent: 01-05-2018 11:35
From: rosemary joe
Subject: Best practices for Reuse

Hi Scott,

There are a series of videos located here in the Reuse and Sync section that are very helpful.  Can you give me the 2015 webinar link you are having trouble with and I will investigate why it is not working?

Regarding your specific question, what do you mean by "accepted delta"?  Are these the reused items you do not want synced?

------------------------------
Rosemary Joe
Jama Software

Original Message:
Sent: 01-05-2018 04:59
From: Scott Rocca
Subject: Best practices for Reuse

I'm starting out with using Reuse and was after best practices.  Search doesn't turn anything obvious up (the link to the 2015 webinar doesn't work for me).  Please can you point to any material on best practices?

I have a specific question associated with this as well.  I've reused a set and have sync'd it to my satisfaction, leaving a couple of accepted delta.  How do I mark/deal with the deltas I'm happy to leave, so that I don't have to review them every time I do a sync?  I tried breaking the sync links but this doesn't seem to work.

Thank you for any help.

------------------------------
Scott Rocca
UTAS
Malvern
------------------------------

Hi Scott,

I think the video you are referring to can be found here.  Sorry the link did not work for you.  The series of videos I pointed to earlier are taken from the 'ask Jama webinar'.

Hope that helps.

------------------------------
Rosemary Joe
Jama Software
------------------------------

Original Message:
Sent: 01-10-2018 05:10
From: Scott Rocca
Subject: Best practices for Reuse

​Rosemary

Thank you for the pointer.  Next time I'll look there first!

The link was in this discussion : Where is the "Ask Jama About Reuse" webinar?

Kind regards

Scott


------------------------------
Scott Rocca
UTAS
Malvern

Original Message:
Sent: 01-05-2018 11:35
From: rosemary joe
Subject: Best practices for Reuse

Hi Scott,

There are a series of videos located here in the Reuse and Sync section that are very helpful.  Can you give me the 2015 webinar link you are having trouble with and I will investigate why it is not working?

Regarding your specific question, what do you mean by "accepted delta"?  Are these the reused items you do not want synced?

------------------------------
Rosemary Joe
Jama Software

Original Message:
Sent: 01-05-2018 04:59
From: Scott Rocca
Subject: Best practices for Reuse

I'm starting out with using Reuse and was after best practices.  Search doesn't turn anything obvious up (the link to the 2015 webinar doesn't work for me).  Please can you point to any material on best practices?

I have a specific question associated with this as well.  I've reused a set and have sync'd it to my satisfaction, leaving a couple of accepted delta.  How do I mark/deal with the deltas I'm happy to leave, so that I don't have to review them every time I do a sync?  I tried breaking the sync links but this doesn't seem to work.

Thank you for any help.

------------------------------
Scott Rocca
UTAS
Malvern
------------------------------

​Rosemary

Thank you; link worked.

Kind regards

Scott


------------------------------
Scott Rocca
UTAS
Malvern
------------------------------

Original Message:
Sent: 01-10-2018 13:36
From: rosemary joe
Subject: Best practices for Reuse

Hi Scott,

I think the video you are referring to can be found here.  Sorry the link did not work for you.  The series of videos I pointed to earlier are taken from the 'ask Jama webinar'.

Hope that helps.

------------------------------
Rosemary Joe
Jama Software

Original Message:
Sent: 01-10-2018 05:10
From: Scott Rocca
Subject: Best practices for Reuse

​Rosemary

Thank you for the pointer.  Next time I'll look there first!

The link was in this discussion : Where is the "Ask Jama About Reuse" webinar?

Kind regards

Scott


------------------------------
Scott Rocca
UTAS
Malvern

Original Message:
Sent: 01-05-2018 11:35
From: rosemary joe
Subject: Best practices for Reuse

Hi Scott,

There are a series of videos located here in the Reuse and Sync section that are very helpful.  Can you give me the 2015 webinar link you are having trouble with and I will investigate why it is not working?

Regarding your specific question, what do you mean by "accepted delta"?  Are these the reused items you do not want synced?

------------------------------
Rosemary Joe
Jama Software

Original Message:
Sent: 01-05-2018 04:59
From: Scott Rocca
Subject: Best practices for Reuse

I'm starting out with using Reuse and was after best practices.  Search doesn't turn anything obvious up (the link to the 2015 webinar doesn't work for me).  Please can you point to any material on best practices?

I have a specific question associated with this as well.  I've reused a set and have sync'd it to my satisfaction, leaving a couple of accepted delta.  How do I mark/deal with the deltas I'm happy to leave, so that I don't have to review them every time I do a sync?  I tried breaking the sync links but this doesn't seem to work.

Thank you for any help.

------------------------------
Scott Rocca
UTAS
Malvern
------------------------------